top of page
Temperature Guard VM608E.jpg

VM608E Computer Room Guard

  • Monitor temperature, humidity and water in 3 remote areas.

  • Built in temperature and humidity sensor.

  • Monitor water sensor, N/O, N/C switch closures.

  • Monitors power.

  • Receive alarm email and text messages.

  • Built in phone dialer.

  • Network ready and includes free Data Capture software.

  • Available with NIST calibration certificate.

VM608E: $725

VM608E with NIST calibration certificate: $755

(valid for two years)

The VM608E is available without the Ethernet port.  All programming and alarming is done over the phone.  This model is ideal for high security locations where you are not allowed to connect to the network.

VM608: $675

 

 

The VM608E is the leading product in Server Room protection.

 

The Computer Room Guard monitors temperature, humidity, power, water, and open doors.

 

It will call or email you if there is a problem. Use it to monitor multiple rooms and even integrate with an existing alarm panel.

 

Compete data logging using our free Data Capture software. This is our best seller for computer room protection.

Feel free to call us if you need more information or to order

Description

You need to protect the equipment in your data center, computer room, or equipment room from the damaging effects of high temperature and high humidity.
The best way to protect sensitive electronics is to constantly monitor the temperature and/or humidity in your data center, computer room, or server room and be notified immediately about an air conditioning system or power failure.

The Computer Room Guard will give you immediate notification with a telephone alert call or with our Data Capture software running on a PC you will also receive alarm emails and text messages. The early warning you receive will allow you to take corrective action before the servers melt down, bringing the enterprise to a halt.

The Computer Room Guard will call up to eight phone numbers or pagers to notify key personnel of a problem with any computer room, server room, or equipment room. Call anytime and hear the temperature and humidity and power status in a data center, computer room, server room, or equipment room.

Computer/software independent telephone alert calls, made by devices like the Computer Room Guard, are a must-have for any mission critical monitoring application.

To receive email and text messages our free Data Capture software must be running on a PC or server. Data Capture sends out the emails.

For additional protection, water sensors, door sensors, or any sensor with a dry contact output can be connected to the Computer Room Guard. Get notified if there is a water leak or a door is left open.

The Computer Room Guard can be used as a simple single room temperature alarm, a multiple room temperature alarm, a simple humidity alarm, a multiple room humidity alarm, or any combination of sensors to fulfill your requirements for an environmental alarm.

Features

  • Individual programmable high and low temperature and humidity limits and time delay.

  • Recordable identification message for each sensor.

  • Field calibrateable temperature and humidity readings.

  • Record a message to indicate the location of the Computer Room Guard.

  • 3 dry contact inputs can be programmed to be a water sensor input, or normally open or normally closed.

  • LCD displays real time data.

  • Uses existing analog phone line

  • Ethernet port with built in web status page.

Specifications

  • External temperature sensor maximum temperature sensor range: -328°F to 392°F, -200°C to 200°C

  • Factory calibrated range -148°F to 69°F (-100°C to 21°C) to less than 1 degree

  • Temperature measurement resolution .1°F

  • Temperature measurement accuracy ±1°F

  • Sensor Type: 1000 Ohm Platinum (.00385 TCR)

  • Maximum Humidity Sensor Range: 10-95%RH

  • Humidity measurement resolution 1%

  • External humidity measurement accuracy ±3%

  • Internal humidity measurement accuracy ±5%

  • 0.5a 125vac alarm relay output

  • Internal alarm buzzer: (85dB)

  • Program eight, twenty digit phone numbers

  • Rechargeable 24 hour battery backup included

  • Plug-in wall transformer, splitter and telephone extension cable included

  • FCC Approved and Registered

  • Operating Temperature Range 32°F to 125°F

  • Enclosure Dimensions: 8.790" x 4.620" x 2.255"

Apps available for Android and iOS

bottom of page