Scroll through to view our available sensors and accessories.

Need help selecting the right temperature sensor for your application?  Give us a call, we'll be happy to help.

 
 
aci-1k-2w-sp.jpg

SP Temperature Sensor

 

  • Temperature sensor mounted to a stainless steel wall switch plate

  • The SP is best for walk-in coolers and open display cases. They mount easily to the wall and create a shield over the sensor.

  • This sensor can be ordered with a NIST certificate

SP: $30

SP with NIST calibration certificate: $60

 
 
BP2-G Temperature Sensor

BP2-G Temperature Sensor in Vial with Glycol

  • The BP2-G temperature sensor is perfect for monitoring product in refrigerators and freezers.

  • Temperature sensors in vial filled with glycol are recommend by the CDC as well as the VFC program.

  • This sensor can be ordered with a NIST certificate.

BP2-G: $55

BP2-G with NIST calibration certificate: $75

Vial with cable gland and glass beads only: $16

bpv-large.jpg

BP-V Temperature Sensor in Vial with Beads

  • The temperature sensor in vial filled with beads helps to prevent sudden temperature spikes when a door is opened.

  • The BP-V is perfect for applications where glycol is not required.

  • The vial filled with beads can be ordered separately.

  • This sensor can be ordered with a NIST certificate

BP-V: $45

BP-V with NIST calibration certificate: $65

ht 2.jpg

BP-HT High Temperature Sensor

  • The stainless steel BP-HT is used to monitor temperatures from -40°F to 740°F

BP-HT: $80

BP-HT with NIST calibration certificate: $110

white rh3 2.jpg

R wall mount temperature sensor

  • The R sensor measures temperature

  • Can be used with all models

RH3-R wall mount temperature and humidity sensors

  • The RH3-R monitors both temperature and humidity

  • For use with the VM608E only

R: $30

R with NIST calibration certificate: $60

RH3-R: $125

RH3-R with NIST calibration certificate: $195

 
bp2-2 2.jpg

BP2 Sensor

lts 2.jpg

LTS Sensor

Bare temperature sensors

The BP2 sensor can be used for temperatures from -58°F to 392°F

The LTS can be used for temperatures down to -198°C.  The LTS is submersible.

Both the BP2 and the LTS are available with NIST certificate.

BP2: $35

BP2 with NIST calibration certificate: $55

LTS: $100

LTS with NIST calibration certificate: $130

 
 

Flex Kits

For a clean, simple installation our BP and LTS  sensors can be ordered as a kit that includes a thin flexible cable wraps smoothly around the edge of the fridge/freezer and will not interfere with the seal.

The kit includes:

  • One temperature sensor in vial

  • 25' of extension cable

  • One Flexible cable

Sensor connects to the flex cable

FX flex kit interior picture

Flex cable wraps from inside to outside of the refrigerator

Exterior image flex cable

The flex cable then connects to the Temperature Guard with the included cable.

Flex cable to M308 connecton.

BP2-G Flex Kit: $90

BP2-G Flex Kit with NIST calibration certificate: $110

BP-V Flex Kit: $80

BP-V Flex Kit with NIST calibration certificate: $100

Replacement Flex Circuit: $20

dr 2.jpg

DR Door Magnetic Open Sensor

  • The door proximity sensor is used to detect open doors.

  • Can be used with all Temperature Guard models.

  • Note: Two sensors are shown.

DR: $20

 
 
 
lts-v 2.jpg

LTS-V Temperature Sensor in Vial with Beads

  • The temperature sensor in vial filled with beads helps to prevent sudden temperature spikes when a door is opened.

  • The LTS-V can be used for temperatures from -148°F to 266°F is submersible.

  • This sensor can be ordered with a NIST certificate

LTS-V: $125

LTS-V with NIST calibration certificate: $155

stdwire.jpg

Standard extension wire for all temperature sensors. Excellent for short runs.

(22 awg, twisted pair, non jacketed)

 

Available in 25' or 100' rolls

25' Roll: $20

100' Roll: $45

industrialwire.jpg

Industrial extension wire for all temperature sensors. Recommend for long runs.

(18 awg,  two conductor, jacketed)

250' Roll: $85

industrialwire.jpg

Extension wire for use with RH3-R Temperature / Humidity sensor

5 Conductor Extension Wire (100') for RH3-R

(18 awg,  two conductor, jacketed)

100' Roll: $50

wtr-1040.jpg

Water Detection Sensor

Water Detection Sensor

The water sensor is used to detect water on the floor.  When water touches any two of the four stainless steel contacts an alarm is raised.

For use with with all of our monitors except our VM605E.

 
PowerSupply.jpg

Replacement power supplies

Input voltage: 100 ~ 240 VAC

Center positive jack

Available in 5vdc or 12vdc

Important: Be sure to purchase the correct power supply for your Temperature Guard.  Applying the incorrect voltage will cause damage!

5vDC Power Supply: $16

12vDC Power Supply: $18