|
| |
|
|
Product Description
With the VM500-11 you can monitor the temperature
in six areas across a wide temperature range. For each
temperature sensor there is an isolated, normally open set of contacts
that can be connected directly to security panels. The contacts
are closed whenever the temperature goes out of limits. The
built in telephone dialer will immediately notify personnel any time, day or night,
that a problem has occurred. |
|
The VM500-11
seamlessly interfaces with all security panels.
- Install the VM500-11 in a convenient location to power and a phone line.
- Place the temperature sensor in the
desired locations and connect the two wires to the VM500-11.
- Connect the isolated NO contacts to
you security panel.
- Follow the simple programming instructions in the manual and you're up and running!
|
|
|
- Programmable high and low temperature limits for each sensor.
- Isolated alarm relays, normally open, dry contacts for each
sensor
- Programmable time delay for each sensor.
- Recordable identification message for each
sensor.
- Field correctable temperature readings.
- Record a message to indicate the location of the Property
Guard.
- LCD displays real time data.
- Uses existing phone line, no need for a second phone line.
- Optional Ethernet Data Logging
Capabilities.
|
|
|
|
|
|
- Maximum Temperature Sensor Range: -40°F to
212°F, -40°C to 100°C
- Measurement resolution 1°F
- Sensor Type: 1000 Ohm Platinum (.00385 TCR)
- Six, 0.5a 125vac NO alarm relay outputs
- Internal alarm buzzer: (85dB)
- Program four twenty digit phone numbers
- Rechargeable four hour battery backup
included
- Plug-in wall transformer, splitter and
telephone extension cable included
- FCC Approved and Registered
- Operating Temperature Range 32°F to 125°F
- Enclosure Dimensions: 8.790" x 4.620" x
2.255"
|
Data Logging
and Reporting Capability with the DCP-E option
Add the DCP-E option to the
Property Guard to form a complete monitoring and
alarming solution. With the Ethernet Data
Collection Package added to your VM500-10 the Refrigerator/Freezer Guard will call and
send emails detailing the problem so you can quickly take
corrective actions to avoid an expensive loss of property.
The Data Capture Program automatically collects and maintains a log
of the data obtained from your Property Guard.
|
|
.gif){kind=spacer}
Our Solutions
.gif){kind=spacer}
Key Points
