|
| |
Temperature sensors for use with the:
Computer Room Guard, VM500-8
Sensors are used to
allow the Computer Room Guard to sense the room temperature, humidity, or water
status.
|
|
|
 |
|
Specifications
|
|
Temperature: 32° to 125°F
|
|
Temperature: 32° to 125°F
Humidity: 20 to 100%RH
|
|
Temperature: 32° to 125°F
|
Temperature:
32° to 125°F
|
|
Water
|
|
|
|
Typical Applications
|
|
Computer and equipment room temperature monitoring
|
|
Computer and equipment room temperature and
humidity monitoring
|
Industrial equipment room temp monitoring
|
|
Sensing heat build-ups inside racks or
specific equipment. |
|
Computer and equipment room water intrusion
detection |
|
|
|
|
|
|
|
|
|
|
|
Wallmount Room
Temperature Sensor
model ACI/1K-2W-R |
 |
|
Key Points |
|
- Wall-mounted temperature sensor
- Attractive look
|
|
Description:
The attractive look and installation options of the Wallmount
Temperature Sensor make it an excellent choice for computer/equipment
rooms.
|
Specifications:
Operating Range: 32°F to 125°F (0°C to 50°C)
Sensor dimensions: 3.84" x 2.75" x 1.15"
Sensor connection: 2 position terminal block
NIST Traceable Certificate Available! |
|
|
Price: $24.50 
|
Wallmount Room
Temperature and Humidity Sensor
model ACI/1K-2W-RH3-R |
|
|
| Key
Points |
|
- Wall-mounted temperature and
humidity sensor
- Attractive look
|
|
Description:
The attractive look and installation options of the Wallmount
Temperature and Humidity Sensor make it an excellent choice for
computer/equipment rooms.
There is no restriction on how far the sensor can be away from the
Computer Room Guard. Any error induced by long wire runs can
calibrated out. See the manual for instruction on calibrating out
the error. |
Specifications:
Operating Range: 32°F to 125°F (0°C to 50°C)
20% to 100%RH
Sensor dimensions: 3.84" x 2.75" x 1.15"
Sensor connection: 5 position terminal block
NIST Traceable Certificate Available! |
|
|
Price: $97.50
|
Stainless Plate Temperature Sensor
model ACI/1K-2W-SP |
|
Description:
The clean look and flush-mount installation options of the Stainless Plate
Temperature Sensor make it an excellent choice for walk-in refrigerators and
freezers.
Mounting the sensor on the back of a 1 Gang stainless steel plate will
provide a very rugged installation. The 1/8" foam insulation pad on the back
side will insulate the sensor from any drafts in the wall. |
Specifications:
Sensing Range: -55°F to 69°F (-48°C to 20°C)
Operating Range: -55°F to 212°F (-48°C to 100°C)
Sensor dimensions: 4.25" x 2.75"
Sensor connection: 24", twisted pair leads
NIST Traceable Certificate Available! |
|
|
Price: $27.50 |
|
Description:
The small size and rugged design make this a good choice when space is a concern or when an installation is going to
require an adaptable solution or a tight fit sensor. |
Specifications:
Operating Range: -58°F to 212°F (-50°C to 100°C)
Sensor dimensions: 0.25" diameter, 1" long
Sensor connection: 48", twisted pair leads
NIST Traceable Certificate Available! |
|
|
Price: $22.50
|
Water Sensor
model WTR-1040 |
|
Description:
Water Sensor WTR-1040 is used to
detect the presence of water on the floor due to leaking A/C units or defrosting freezers.
The Water Sensor is mounted to the floor with a single screw.
Water is detected when water covers any two steel contact points. The WTR-1040
comes with 15 ft. of cable which can be extended as necessary.
Up to 4 sensors can be connected in parallel. |
Specifications:
Operating Range: 32°F to 140°F (0°C to 60°C)
Dimensions: 2" x 3" x 0.88"
|
|
|
Price: $24.00 |
|
.gif){kind=spacer}
Our Solutions
