|
| |
Benefits
Monitor seven sensors with 4-20ma outputs. Sensors
are available from numerous manufacturers that can monitor temperature,
flow, pressure, humidity, pretty much any parameter. This is the perfect
product if you have a system or process that needs to be monitored
24/7/365 and someone notified about a fault condition immediately.
We can mount your 4-20MA Monitor in a NEMA 4
enclosure for you. The enclosure is 12"x12" and made of
ABS plastic with a hinged smoked colored cover so you can see the
display without opening the door. The enclosure also comes with
air vents for cooling and knockouts for simple wiring and is lockable
to prevent tampering. Select the CAB PC 303018T option when ordering. |
Features |
- Monitors seven sensors with self-powered 4-20ma outputs.
- Isolated 4-20ma inputs prevent ground loops.
- Monitor two dry contact inputs (NO).
- Calls you if a sensor's reading goes out of programmed limits.
- Calls you upon dry contact input closure.
- Calls you if there is a power loss.
- Emergency messages can be sent to telephone pagers.
- Automatically converts the sensor's ma output into it's units
of measurement.
- All parameters are programmed over the phone following voice
menus.
- Programmable low, high limits and sensor out-of-limits time
delay.
- Record an identification and unit of measurement message for
each sensor.
- Stores the maximum and minimum readings for each sensor.
- Store four, twenty-digit phone numbers.
- Four line LCD display shows all data.
- Alarm relay output.
- Alarm buzzer is turned on when a sensor goes out of limits.
|
|
Specifications |
- Sensor Type: Self powered 4-20ma output
sensors
- Sensor Input: Isolated, 20 ohm input impedance,
non powered
- Response Time: 50ms
- Accuracy: +- .05ma
- One dry contact inputs
- 5a 125vac relay output
- Alarm buzzer: (85dB)
- Rechargeable four hour battery backup included
(optional batteries are available).
- Plug-in wall transformer, splitter and telephone
extension cable included.
- FCC Approved and Registered
- Enclosure Dimensions: 8.790" x 4.620"
x 2.255"
|
|
7 Channel 4-20ma
Sensor Monitor and Alarm
|
|
|
|
.gif){kind=spacer}
Our Solutions
.gif){kind=spacer}
Key Points
